G6 MULTIMEDIA CARD(G6 U-DISK) 简易安装及操作说明:

G6 MULTIMEDIA CARD(G6 U-DISK) Manual:

Features:

-No need to install Device Driver except Old WIN98. (Include WINXP, WIN2000, New WIN98)

-Files can be added, deleted without the need of changing the whole contents of memory.

-Unique U-DISK function, easy to use & install. Work fine in any WIN PC, no compatibility problems at all.

-Fast copying time. It only takes 12 seconds for copying a 128Mbit files

Parts:

G6 FLASHCARD G6 U-DISK BURNER 2in1extension charger cable

(G6 U-DISK) (Optional)

Importance:

G6 flashcard has been already formatted before shipping out. Normally, users are no need to format the flashcard before using. If users need to format the G6flash for maintenance purpose, please format the G6flash in FAT(16) format. And refer to the procedures listed in the “Maintenance” part of this manual.

Operation:

1. Connect/Disconnect G6 U-DISK:

-Connect G6 U-DISK to PC

I. Insert “G6 U-DISK”into G6 U-DISK BURNER.

II. Put “G6 U-Disk BURNER” with ”G6 U-DISK” into the USB port of PC. (Extension cable can be added if it is necessary.)

I. Insert “G6 U-DISK”into G6 U-DISK BURNER：

II. Put “G6 U-Disk BURNER” with ”G6 U-DISK” into the USB port of PC.

Note:

Please insert “G6 U-Disk” card into G6 USB BURNER before connecting “G6 USB BURNER” to PC.

-Disconnect ”G6 U-DISK” from PC:

I. Left click “Safely remove USB mass storage device drive” icon.

II. Select the option (turn blue), left click it to confirm the operation

III. Pull “G6 U-DISK BURNER” out from the USB port of PC.

IV. Pull “G6 FLASHCARD” out from “G6 U-DISK BURNER”.

I. Left click “Safely remove USB mass storage device drive” icon.

II. Select the option (turn blue), left click it to confirm the operation

A massage “The ‘USB mass storage drive’ device can now be safely removed from the system “ will come out to indicate that the operation is successfully.

III. Pull “G6 U-DISK BURNER” out from the USB port of PC.

2. Installation of G6 U-DISK Manage (PC application):

I. G6 U-DISK (G6 FLASHCARD)

In fact, users can use G6 FLASHCARD without installing any application program. Users just need to copy the proper games into any directory of G6 FLASHCARD and those games should be able to run in the consoles. However, it may bring much more features if adding games through “G6 U-DISK MANAGER” application. In addition, to use PDA and emulator games function, please make sure the PDA & EMU directories existing in the root directory of G6 U-DISK. Users may copy these directories from our installation disk if these directories are missing.

II. PC

To install “G6 U-Disk Manager“, please double click the icon (or file) of “G6 U-Disk Manager“ from the installation disk

Then Click“Next >”,

Select the path which you wish to install, then click “Next >”,

Click“Install ”

Processing…

Click“Finish”，program has been installed successfully.

3. There are 2 methods of writing games:

Method 1. The same procedures as copying a file from PC to U-DRIVE.

For example:

Browse and select a game (or some games) from any directory of PC

Copy one or more games. (You may use CTRL-C to make the selection)

Select the target directory from any directory of G6 U-DISK eg.“Removable Disk（F：）”

Press CTRL-V to copy the selected file(s) into G6 U-DISK.

Method 2. Run “G6 U-DISK MANAGER” application, (more features)

I. Select the corresponding drive of G6 U-DISK. eg. Removable Disk (J:)

II. Click“OK” to confirm the selection.

The file names of the games will be listed in the card region if games have been copied into flashcard by using G6 U-DISK MANAGER .

Select one of the tag (NDS or GBA) according to the type of games you wish to copy.

Click“Write ”

Browse and select games from the pop-up window. More than one game can be selected at the same time. Click open to confirm the selection of the selected games.

The IPS/RealTime SAVE

An additional selection window (IPS / REAL TIME SAVE / COMPRESSION) will come out if the selected game is a GBA type game.

Make change of the options if necessary. Then click “OK” to confirm it.

The file name of the game(s) will be listed in the “Card” region to indicate that the game(s) have been copied successfully.

*(The procedures are similar for both NDS or GBA.)

Configuration:

If the text characters displaying on the application are wrong, please click the second last button as shown below. (It’s a ”Configuration” button)

The ”Configuration” Window will be popped up.

1. Select the language corresponding to the language of your system.

2. Click (X) to close the pop-up window.

3. Then Click (X) to close the application. Restart “G6 U-DISK Manager” to make previous modification taking effect. The wrong text characters problem should be cleared.

(In addition, users may also alter another setting at “Config” window too.)

4. Run games on GBA/NDS consoles: (GBA mode)

Method 1.

-Select the “My card” icon, press “A “ button to enter.

-Select a game from any directory of G6 U-DISK and press “A” to run

-It supports saving “game save data” into SRAM

Method 2.

-Select “GAME” icon

-All games copying via “G6 U-DISK MANAGER” will be shown up after entering into “GAME” icon. (All games and its savers are stored in GBA directory.)

-Browse, select and press “A” to run the selected game.

5. Description of icons:

There are 4 icons will be appear on the screen after entering into G6 loader main menu：

MyCard

Game

Media Player

PDA

MyCard

-Browse the content of U-DISK (Only support short DOS name currently)

-Browse, select and run .GBA game

-Operation

L R	Page up/down
Direction (cross)	Movement of the cursor
A	Select/confirm
START	Back to main menu

Select game from“MyCard”

Press the “A” button, to run a game from “MyCard”

Game

-Choose a game by selecting the corresponding games screen shot (G6 unique function)

-Keep more than 1 game save data of each game. (SMS)

-Operation

L R	Page up/down
Direction (cross)	Movement of the cursor
A	Select/confirm
START	Back to main menu

Note:

All games and its savers are stored in GBA directory. Please add or remove games by using G6 U-Disk manager application. Only games added by “G6 U-Disk manager application” will be shown up.

Press any key to enter into “GAME” menu

Selecting game…

Press “A” after selecting a game, a pull-down menu will be popped up, users may select a “‘saver” to load.

Game Loading…

“NORMAL SAVE” backup

A “Backup“ window will come out after press “Select”

There are 3 backup game savers for each game. (XXXXXXX is the game name of the selected game.)

XXXXXX0.sav Default Saver

XXXXXX1.sav Backup Saver1

XXXXXX2.sav Backup Saver2

Backup "Current game save data" into "Backup save data file":

-------------------------------------------------------------

1) Press "Select" button after selecting a game.

2) The "Backup" window will come out.

3) Select one of the backup saverfile which you wish to write data in.

Restore "game save data" to console:

------------------------------------

1) Press "A" button after selecting a game.

2) One "Default Saver" and two "Backup Saver" files for you to select

3) Select one of the backup saver file which you wish to load. Software will copy the data of the selected "Backup Saver" into the file of "Default Saver".

Note:

The game save data is stored into SRAM of G6flash. And the SRAM data will be automatically copied into the “Default Saver” after booting up GBA/NDS console each time. Hence, the previous game save data will be permanently stored into flash memory every time booting up the console.

Users may also has an option to copy the data of “Default Saver” into one of the “Backup Saver” by pressing the “Select” button after selecting the game. It’s very useful for making backup of the game save data or swapping other users to play the same game.

Media Player

-Movie & Music Player. E-book, Picture and Text document Viewer

-Operation

L R	Page up/down
Direction (cross)	Movement of the cursor
A	Select/confirm
START	Back to main menu

Select Media Player & Press “A” to enter.

Main Menu of GBA Media Player:

PDA

A	Confirm
START	back to Main Menu

Select My ”PDA” and Press “A” to enter

Additional features:

To enable additional features:

First, please make sure that you have enabled the option of “Enable Real Time” from PC G6 U-DISK MANAGER application. Then press A+B+L+R simultaneously at anytime during game.

A “Special Effect Menu” will come out after press A+B+L+R simultaneously when playing game.

SAVE - Save all the contents of GBA into Flash Memory of G6flash

LOAD- Restore the saved contents to GBA from flash memory.

SAVE BACKUP1

LOAD BACKUP1

SAVE BACKUP2

LOAD BACKUP2

RESTART Return to the beginning of game

MAIN MENU Back to Main Menu

Maintenance:

If “Parameter fail” message is displayed on the screen of console. It’s most probably that the format of G6 U-DISK is damaged. It needs repair by our maintenance tools. (Low-level format tools)

Steps:

======

1. Insert G6 U-DISK Burner with G6flash3 into USB port of PC. (Usually, the blue LED will lit up.)

2. Format the G6 U-DISK by using FAT(16) format. (Don’t put any file into G6 U-DISK after doing this step.)

3. Run “MPutility.exe” by clicking its icon.

4. Click OK (and don’t alter the setting.) A new window will come up later.

5. Click OK to start. It takes around 5 minutes to format a 2Gbit flashcard, please wait until it finished. A massage will come out to indicate that the processing is successfully completed.

6. Copy “EMU” and “PDA” directories from installation disk to G6 U-DISK. (To enable PDA and emulator games function.)

7. Add games by using G6 U-DISK MANAGER application. (It will create "GBA" and "NDS" directories for storing games and its save data.)

8. Put G6 flashcard into console and test it.

The Maintenance Tools can be downloaded at : http://www.handheldsources.com/Download.html

Loading NDS:

Software:

NDS Menu:

There are 2 icons appear on NDS menu after booting form a NDS.

1. NDS GAME

2. GAME

ICON 1. NDS GAME:

- Support running NDS games

- SMS save support. Each game has 3 game save files.

- Games must be added by using G6 U-DISK MANAGER (games and its save file are stored in NDS directory.)

- Operation:

Up Down	Select games
L R	Previous Page / Next page
A	Select or Confirm
B	Cancel
Select	Backup game save file
Start	Go back to Main Menu

- Users may also use the “Touch Screen” to control all the above operation.

Procedure of loading game and it’s game save data:

- Select a game from the list and press “A”, a new window for selecting “Saver” will come out.

- Select a “game save data” file from the list. Usually, user only need to select the “Default”, as user may want to continuously use the previous game save data by selecting the “Default”.

Procedure of storing game save data into backup game save file:

- Press "Select" button after entering into “NDS GAME” icon, the "Backup" window will come out.

- Select one of the backup game save file which you wish to write data in.

Note:

Normally, games are necessary to use some memory space to store some parameters (game save data) for recording the status, score, money, level etc… To prevent loss of this data and keep continuously to use previous game save data, it is necessary to keep these data for long even power off the consoles. Thus, these data usually are stored in the memory of the cart. For G6flash, the data is stored in the SRAM inside the flashcard. Our SMS (Save Management System) will automatically copy the SRAM data into the “Default Saver” file every time booting up GBA/NDS console. Hence, the previous game save data will be permanently stored into flash memory every time booting up the console. Usually, users only need to select loading the “Default” game save file. The game save data will be continuously to keep. Users may also has an option to copy the data of “Default ” into one of the “Backup Saver” by pressing the “Select” button after entering into NDS GAME loader. It’s very useful for making backup of the game save data or swapping other users to play the same game.

Tips:

To prevent saver data loss, please boot up the console one more time without choosing a game to load every time finished playing a game. (The SRAM data will be copied into XXXXXXX.0 file.-Default saver file.)

ICON 2. GAME

- Support running NDS games and NDS Demo

- Support storing game save data in G6flash SRAM

- Games can be stored in any location within the G6 U-DISK

Procedure of loading a game:

- Browse and Select a game from the menu.

- Press “A” to confirm.

- A new window with 2 options, “Run” or “Add Header” for users to select.

- “Run” for loading the normal “NDS game” which has its own loader program.

- “Add Header” for loading the “NDS Demo” games which need a general header ahead of the actual binary.

- Operation

Up Down	Select games
L R	Previous Page / Next page
A	Select or Confirm
B	Cancel
Select	Backup game save file
Start	Go back to Main Menu

- Users may also use the “Touch Screen” to control all the above operation.

Hardware:

Button:

- Normally, it’s not necessary to press this button. It’s for booting up some special kind of games. eg. The GST file. If game screen did not come out after a game had already been loaded, please follow the following steps to boot the game:

1. Keep pressing the button on G6 cart (Don’t release the button)

2. Power off the NDS

3. Power on the NDS console promptly.

4. You may release the button around 2 seconds later. (or keep press until screen come out.)

The game screen should come out and the game will run properly. (All GST games are worked fine by using this method so far.)

(For Movie, Music and Pictures please install the application program under “Media” directory.)

(No games, movie, music are included in our products.)

Caution:

Do not keep press the button for a long time because it will consume the power of battery.

- The NDS functions can only work in NDS consoles.

- To use NDS function, PASSKEY, PASSME, FLASHME is necessary to be connected or installed.

- PASSKEY, PASSME or FLASHME cannot work with IDS or some new model of NDS.